 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MP Series * SIP SSR * Ratings to 4A @ 280 VAC or 3A @ 60 VDC * Triac (AC) or Transistor (DC) output * DC Control * Normally open (AC or DC) or normally closed output (DC only) * CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 3-32 VDC 3A MP120D3 3A MP240D3 4A MP240D4 3A MPDCD3 AVAILABLE OPTIONS AC OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] (2) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum It for fusing (8.3 msec) [A sec] Minimum Power Factor (with Maximum Load) MP120D3 12-140 400 5 200 3 0.02 90 1.6 36 0.5 MP240D3 24-280 600 5 200 3 0.02 90 1.6 36 0.5 MP240D4 24-280 600 5 200 4 0.02 130 1.6 72 0.5 DC OUTPUT SPECIFICATIONS (1) Description Operating Voltage Range [VDC] Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current [Adc] Maximum On-State Voltage Drop @ Rated Current [Vpk] MPDCD3 3-60 3 0.02 5 1.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] AC Output 3-32 VDC 3.0 VDC 1.0 VDC 1500 Ohm 1/2 Cycle 1/2 Cycle DC Output 3-32 VDC 3.0 VDC 1.0 VDC 1500 Ohm 100 s 100 s DC Output (-B) 3-32 VDC 1.0 VDC 3.0 VDC 1500 Ohm 100 s 100 s GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 4000 Vrms 109 Ohm 8 pF -40 to 80C -40 to 125C 0.7 oz. (20g) Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443,13.11.1 3) Inductive loads should be diode suppressed MECHANICAL SPECIFICATIONS DC OUTPUT PIN 1: +DC LOAD PIN 2: -DC LOAD PIN 3: +DC CONTR OL PIN 4: -DC CONTROL AC Output PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTR OL PIN 4: -D C CONTROL THERMAL DERATE INFORMATION AGENCY APPROVALS EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: UL E116950 CSA LR81689 (AC Output Only) VDE 5900 UG (AC Output Only) Rev. 120210 ANNEX - ENVIROMENTAL INFORMATION |
Price & Availability of MP120D2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |